E6 · Six-Camera Ego Capture Device
4 global-shutter grayscale cameras plus 2 RGB cameras with on-device SLAM output. Choose between the two RGB sensor versions when ordering.
PRODUCTS · CAPTURE HARDWARE
Filter head-worn devices, gloves, teleop robot bases and capture equipment by form factor. Review specifications, recording samples and integration requirements; development targets require separate validation.
4 global-shutter grayscale cameras plus 2 RGB cameras with on-device SLAM output. Choose between the two RGB sensor versions when ordering.
Two RGB global cameras (1600×1200, up to 30 FPS), per-camera HFOV 139° / VFOV 111°, IMU and magnetometer at 1000 Hz, binocular hardware sync under 1 µs. E2 has no on-device SLAM; pose is reconstructed offline on a computer.
The matrix lists ten cameras plus TOF and mocap expansion; the former detail page lists a different configuration. Tracking figures are development targets; confirm camera configuration, current supply and motion-capture options.
Adds a close-up first-person view for fine hand operations and synchronizes to E6/E2 using PPS + UART.
Forsense production · TOBI integration. Choose G7 for fingertip spatial pose: 5× EMF+IMU, 120 Hz, <20 ms wired / <30 ms wireless, 2 mm / 3° (datasheet). Prefer G2-L in metal-heavy or close bimanual scenes.
In the product illustration
Illustration only. Final delivery is subject to the written specification.
Forsense production · TOBI integration. Wireless long-session gesture capture: 1+8+wrist IMU, ≤20 ms, 50 Hz, BT 5.1, 7 h (datasheet). Need millimeter-level fingertip position tracking? See G7.
For locating grippers and external sensors; joint positioning and synchronization with E6/E8 are confirmed per project.
20 DoF, 5 kg per arm, 0–2.1 m vertical workspace, four-wheel steering and drive, 48V 20Ah, about 6 h. End effector interface: 2-finger gripper or 5-finger hand, quick-change.
Model RMC-AIDAL. Folded 640×450×1780 mm, about 80 kg, 900 mm lift, 0–2.4 m vertical, 5 kg rated per arm, differential 1.5 m/s, LFP 48V 20Ah.
21 active DoF (arms 14, waist 3, legs 2, neck 2), 5 kg per arm, 570×465×1680 mm, 690 mm turning radius, 40 Ah battery, about 2 h charge.
Three configurations: GLN-RX75 reach 709 mm, 7.8 kg, force feedback; GLN-RX71 reach 474 mm, 3.8 kg, force feedback; local isomorphic kit reach 599 mm, about 1.5 kg, no force feedback.
65 mm stroke, 130 N max grip force, 745 g. Max enveloping payload 5 kg; recommended max friction payload 2 kg. RS485 / Modbus-RTU.
If the model is not locked, we can review device, pilot capture, labeling, and versioned delivery together. You can also buy hardware only. Specs follow the latest written confirmation. English product summaries are available; full written specs remain on the Chinese detail pages.